CARX Air Valve
CARX Air Valve
Product Brief Introduction:
The valve is installed in the pump outlet or water distribution pipeline to remove the air in the tubes, so as to improve the use efficiency of the pipeline and the water pumps, when the negative pressure come into being in the tubes, the valve will inhale the air outside rapidly to prevent the pipeline’s damage due to negative pressure. There are many traits on it such as the structure compact and legerity, sculpt beauty, wearable and long service life.
1. Medium: clean water
2. Temperature: normal temperature
3. The body: HT200 gray cast iron
4. Float and plug head: stainless steel
5. Sealing material: butadiene acrylonitrile rubber
6. The body test down: 1.5 mpa
7. Floating ball, seal test down: 0.05-1.1 MPA not leak
Composite exhaust valve parts HaoMing says material qualitative material sequence
1 the valve body HT200
2 the cover HT200
3 floating ball SUS 304
4 lever frame made of copper ZH59
5 stem copper casting ZH59
6 plug butyl rubber NBR eye head
| No. | Part | Material |
|---|---|---|
1 | Body | HT200 |
2 | Cover | HT200 |
3 | Floating Ball | SUS 304 |
4 | Lever Frame | ZH59 |
5 | Stem | ZH59 |
6 | Plug | NBR |
CARX Demension：
Model | DN(mm) | Dimesnion (mm) | ||||||
|---|---|---|---|---|---|---|---|---|
| H | L | L1 | D | D1 | D2 | z-φd | ||
CARX-1.0 | 20 | 375 | 290 | 180 | 105 | 75 | 55 | 4-12 |
25 | 375 | 290 | 180 | 115 | 85 | 65 | 4-14 | |
50 | 480 | 360 | 205 | 160 | 125 | 100 | 4-14 | |
80 | 520 | 405 | 245 | 195 | 160 | 135 | 4-18 | |
100 | 530 | 405 | 245 | 215 | 180 | 155 | 4-18 | |
CARX Release Air Capacity：
DN | 25 | 50 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 |
|---|---|---|---|---|---|---|---|---|---|---|
| CMB/Hr | 2-88 | 85-352 | 22-904 | 34-1413 | 76-3179 | 135-8831 | 212-8831 | 305-12717 | 415-17309 | 542-22608 |